Concrete floors are easier to clean than other flooring materials. It is best to avoid using a wet mop if your concrete floor has a wooden or laminated surface. The materials would also swell. Concrete floors are durable and not very demanding. Concrete floors can last for a very long time if it is properly maintained.
Undemanding doesn’t mean maintenance-free. Concrete is easy to clean and maintain because it doesn’t have grout lines or joints. Unlike carpets, concrete floor coatings do not have fibers that can trap dirt. If the floor is sealed properly, it will resist water, stains and abrasion. It’s easy to clean up pet accidents and muddy feet.
Concrete has been used outdoors for years. It is great for driveways and garages. Concrete is now a very popular choice for indoor flooring and tabletops. Outdoor concrete floors are different than indoor concrete floors.
Here is a guide on how you can properly clean concrete floors:
1. Wear gloves and goggles
If you plan for a thorough cleaning, you must wear proper gear. Some particles could be inhaled, and they can irritate your eyes. If you have to use cleaning products, gloves will protect your hands.
HTML2_2. Make sure the floor
is clean. Indoor floors tend to be more grimy than outdoor floors. To remove dirt from the surface, you may need to use a brush. You can also use a vacuum or a dust mop. The surface can be cleaned by sweeping, but it also prevents scratches from dirt and grit.
Make sure you don’t use a metal bristle brush. It can trap metallic fibers on concrete surfaces.
3. Look for stains
Concrete is resistant to most stains, but some blemishes can stick. Concrete is porous and can absorb dirt and spills. If the area is large, this step is critical. You don’t have to scrub the whole space. Instead, look for floor stains. This will save you time and effort.
4. Use of appropriate cleaning solution
Remember that before using any cleaner, you must know the type of concrete finish you have. You will be able to identify what you should avoid and what to use. Sealing concrete is often coated with silicate resins, urethanes or acrylic. It is therefore less porous than unsealed concrete. This is why it is not recommended for garages or driveways.
You can remove the stains from concrete coatings with the use of specific products like commercial solutions, pH-neutral cleaner, natural solutions, Trisodium phosphate (TSP), and Muriatic acid.
If you have to deal with the most difficult stains, muriatic acids is the best choice. It can be used to remove rust and dried grout. You must be careful when using the product. You should be careful with this product.
5. Start Scrubbing
In most cases, you only need to use a brush to get rid of the dirt and stain. You can also use a nylon bristle toothbrush if you choose to use TSP with water. This combination can also be used to remove stubborn stains.
HTML6. After the stain is gone, blow the grime away
. You can use a pressure washer to get rid of the products used for cleaning. This step can be done in the afternoon to allow the sun to dry the floor quicker.
7. The surface should be allowed to dry
The time it takes depends on what cleaning method was used. You may need to let some cleaning products dry on the surface for several hours. This means you won’t have the space available until then. This is why you need to plan the cleaning process and include a schedule.
8. You must sweep the floor
Once the floor has dried, you can do a final sweep. If you feel confident about the amount of dust on your floor, you can skip this step.
With the steps above, you can make concrete floors last longer without causing them to stain.
If you have a polished concrete floor, you have to dust mop it regularly. To clean concrete floors well, follow the steps above.
Are you searching for an in-budget concrete floor coating services? Get in touch! We offer specialized services in concrete floor coating.