Guide to Concrete Flooring Cleaning

Concrete floors can be cleaned easily, unlike other flooring materials. It is best to avoid using a wet mop if your concrete floor has a wooden or laminated surface. The materials would also swell. Concrete floors are durable and not very demanding. Concrete floors can last for a very long time if it is properly maintained.

Undemanding doesn’t mean maintenance-free. Concrete is easy to clean and maintain because it doesn’t have grout lines or joints. Unlike carpets, concrete floor coatings do not have fibers that can trap dirt. If the floor is sealed properly, it will resist water, stains and abrasion. It is simple to address pet accidents and muddy feet.

Concrete has been used outdoors for years. It is great for driveways and garages. Concrete is now a very popular choice for indoor flooring and tabletops. Outdoor concrete flooring cleaning is very different from indoor concrete floors.

Here is a guide on how you can properly clean concrete floors:

1. Wear gloves and goggles

Proper gear is required if you are going to do a thorough clean. Some particles could be inhaled, and they can irritate your eyes. If you have to use cleaning products, gloves will protect your hands.

2.

2.

You must make sure that the surface is clean. The surface of outdoor floors is usually more grimy than the indoor ones. To remove dirt from the surface, you may need to use a brush. You can also use a vacuum or a dust mop. The surface can be cleaned but not scratched by grit or dirt.

Do not use a metallic-bristle toothbrush. It can trap metallic fibers on concrete surfaces.

3. Look for stains

Concrete can withstand most stains but some blemishes may stick. Concrete is porous and can absorb dirt and spills. If the area is large, this step is critical. To save time and effort, you can look for floor stains before you scrub the whole space.

4. Use of appropriate cleaning solution

Be sure to know what type of concrete finish your concrete has before you use any cleaner. You will be able to identify what cleaners you should avoid and which ones to use. Sealing concrete is often coated with silicates resins, urethanes or acrylic. It is therefore less porous than unsealed concrete and is better for garages and driveways.

You can remove the stains from concrete coatings with the use of specific products like commercial solutions, pH-neutral cleaner, natural solutions, Trisodium phosphate (TSP), and Muriatic acid.

If you have to deal with the most difficult stains, muriatic acids is the best choice. It can also be used to remove rust and dried grout. You must be careful when using the product. It is extremely potent and can cause serious side effects so make sure you protect your eyes and hands.

5. Start Scrubbing

In most cases, you will only need a brush to remove dirt and stains. You can also use a nylon bristle toothbrush if you choose to use TSP with water. This combination can also be used to remove stubborn stains.

6. After the stain is gone, clean up the grime

To remove products used in cleaning, you can use a pressure washer/hose. This step can be done in the afternoon to allow the sun to dry the floor quicker.

7. Let the surface dry

The time it takes to wait depends on what cleaning method you use. You may need to let some cleaning products sit on the surface for several hours. This means you won’t have the space available until then. This is why you need to plan the cleaning, along with the schedule.

8. Take a look at the floor

A final sweep is necessary after the floor has dried completely. If you feel confident about the amount of dust on the floor, you can skip this step.

With the steps above, you can make concrete floors more resistant to staining.

Conclusion

Dust mop polished concrete floors regularly. To clean concrete floors well, follow the steps above.

Are you searching for an in-budget concrete floor coating services? Get in touch! We offer specialized services in concrete floor coating.

Add a Comment

Your email address will not be published. Required fields are marked *