85% of all worker’s compensation claims are a result of employees slipping on slick floors. This poses a massive social and financial peril to businesses, which has resulted in industrial floor coatings becoming quite popular.

Some typical examples of floor coatings include epoxy, interlocking rubber tiles, and even concrete paint. However, none of these come close to Spartacote polyaspartic floor coating in quality, strength, durability, and slip-resistance.

Since you’re reading this, this more than likely isn’t your first time learning about polyaspartic floor coatings. They were introduced back in the early 1990s by Bayer Material Science, one of the world’s commanding chemical companies. It was originally used as a protective steel coating to prevent corrosion on bridges and other buildings and constructions.

Today, polyaspartic coatings and similar options have become somewhat familiar to the general public, as they’ve been innovated upon and marketed for broader purposes by companies. But they’re probably best known for protecting industrial floors, as well as the operators that safely walk on them.

Here, we’ve tried to bring collectively all of the most frequently asked inquiries regarding polyaspartic commercial floor coatings. To get your inquiries answered, keep reading.

What are polyaspartic commercial floor coatings?

Technically speaking, the term polyaspartic refers to an aliphatic polyurea. Most people are somewhat familiar with polyurea coatings, as they’re utilized in many applications as spray-down tank coatings and truck bedliners. Polyaspartic coatings are typically considered a variation of a polyurea coating and are most often used to protect and add slip-resistance to concrete platforms and floors.

How are polyaspartic floor coatings applied?

Polyaspartic floor coatings can be implemented using a squeegee, seal-coat broom, or nap roller. The most common administration methods are the dip-and-roll method and the ribbon-and-roll method, although these technicalities are typically only interested in professional installers.

Can polyaspartic coatings be applied in cold temperatures?

Yes. Depending on the coating’s particular formulation, polyaspartic industrial floor coatings can be applied in very low temperatures — even in conditions below zero degrees centigrade.

How long does it take for a polyaspartic coating to dry?

One of polyaspartic’s top-selling points is its rapid curing ability. These commercial floor coatings are designed to dry in a matter of hours or even less. In many cases, a facility can have their floors covered one day and be right back to work by the next day. This rapid cure time is one of polyaspartic’s main advantages over conventional epoxy coatings.

How tough are polyaspartic coatings compared to epoxy coatings?

Compared to epoxy floor coatings, polyaspartic coatings are even more long-lasting. Based on empirical testing information, polyaspartic coatings have been shown to provide abrasion resistance, which dramatically outperforms most epoxy coating systems.

Under what circumstances should a polyaspartic floor coating probably not be used?

As versatile and beneficial as they are, polyaspartic commercial floor coatings are not ideal for all environments. If a breathable concrete sealer is needed for a specific floor, a polyaspartic coating wouldn’t be the proper choice for that area. These may include such surfaces as driveways, sidewalks, and other branded concrete surfaces in outdoor settings. Because polyaspartic is a seamless, high-performance polymer coating made to preserve surfaces, it is not a breathable material. Over time, it can also exhibit moisture challenges if not implemented on appropriate surfaces.

Who can install a polyaspartic floor coating?

Because of their strong, high-performing nature, polyaspartic commercial floor coatings should only be applied by a trained concrete coating contractor. They are for expert use only.

Can a polyaspartic coating be applied on top of an epoxy coating?

Yes, polyaspartic coatings can be employed on top of epoxy-coated surfaces. Polyaspartic floor coatings display excellent inter-coat adhesion when utilized over epoxy coatings. In the case of old epoxy coatings that are still adhered to the substrate, a professional polyaspartic coating installer can implement a fresh polyaspartic top-coat over the area. This process involves mechanically profiling the epoxy-coated floor first by sanding it. Next, the excess dirt leftover must be vacuumed up, and the area must be thoroughly wiped down with a solvent or adhesion promoter to clean the surface. Following this, the floor can be recoated with a polyaspartic coating.

Can a floor with a polyaspartic coating outgas or negatively impact air quality?

Typically no. Polyaspartic floor coatings have low to zero VOC, which means they should not negatively affect the room’s air quality or the building where they’re installed.

Do polyaspartic floor coatings negatively impact the appearance of the floor where they’re applied?

A skilled professional can apply a polyaspartic coating without negatively affecting the aesthetic quality of the floor. Polyaspartic coatings can incorporate attractive designs directly in the coating. The impressive floor designs possible with specialized polyaspartic commercial floor coatings are wonderful for expressing any creative side. If you are interested in becoming a professional applicator or hiring one, we recommend calling ArmorThane. With over 30 years in the business, they have become the go-to company for many throughout the world.

Hopefully, this article has answered any questions you had about polyaspartic commercial floor coatings. From home garages to industrial buildings, polyaspartic floor coatings are ideal for protecting floors and making them safer for the people who walk on them.