What Is The Best Garage Floor Coating?

It cannot be easy to decide between the epoxy coating and polyurethane for the garage floor project. If you have ventured to research each material’s benefits, you know it can get a bit confusing.

Epoxy vs. polyurethane

Both coating products will defend against damage, stains, chemicals, and wear. Each coating is very tough and long-lasting, easy to clean, and light reflective. Depending on the application, they specifically have their advantages. So instead of choosing one or the other, most applications use both.

What is epoxy floor coating?

A thermosetting polymer, epoxy, is available in three formulations, water-based, solvent-based, and 100 percent solids. These materials are used for garage floor coatings and sealers. They provide a wide range of thickness variations, ease of application, VOC considerations, and individual bonding characteristics. Epoxy bonds very strongly to concrete and may be used to resurface weathered out concrete.

The most permanent epoxy coatings are 100 percent solids. These formulations create a remarkably thick, hard, and impact-resistant garage surface. The coating is self-leveling and fills in any hairline floor cracks or other imperfections while providing strong protection. Some options include UV inhibitors, but keep in mind they may still look yellowish after prolonged sun exposure.

What are the advantages of polyurethane?

Similar to epoxy, polyurethane is likewise a high-performance thermosetting polymer coating. It is also referred to as simply urethane, even though polyurethane and urethane are not the same material. If you come across an advertisement for urethane, it is most likely polyurethane.

For garage flooring, aliphatic polyurethane is the best choice. The manufacturer is composed of about 65% solids and is only about three mils thick. Unlike epoxy, polyurethane can’t be adjusted. Yet, aliphatic polyurethane offers more flexibility, greater impact absorption, and abrasion resistance. Polyurethane coating also offers better stability against chemicals.

Also, polyurethane floor coating is more UV stable than epoxy, meaning it won’t turn yellowish with long-term exposure to light. Epoxy is much harder, but polyurethane is a lot more scratch-resistant; it reacts better to humidity and temperature changes.

Even with all of these improvements, epoxy bonds better to concrete, and the thin thickness of polyurethane doesn’t work well at filling in defects.

Which flooring material is the best option?

The general belief is to use both epoxy and polyurethane coating for your garage floor for maximum performance. Whether you hire a professional or do the job yourself, the garage floor epoxy should be used to build thickness, followed by a clear polyurethane topcoat for optimal stability. This process will prevent the epoxy material from yellowing and provide a long-wearing, scratch-resistant coating.

If you would like to know more about how you can utilize these coatings, click here to visit our recommended company, ArmorThane.

ArmorThane is the go-to company when it comes to floor coatings. With over 30 years in the industry, they stand out as the leader for floor coatings.

Which Floor Coatings Work Best for Workout Gyms?

Gym Floor For Health Center & Home Fitness

Workouts are part of everyday activities for many people, and you need a safe environment to do your exercises. Many people have suffered injuries while in public gyms and home workout gyms due to lower quality surfaces. The quality of the floor plays a prominent role in determining the suitability of a workout environment. Floor coatings are amongst the most suitable ways of preventing injuries at gyms. However, this is not the only type of floor coating that you see in the market.

Only a few options can offer full protection, and polyurea-polyaspartic floor coating is one of them. Polyurea-polyaspartic was first used 20 years ago for protecting steel against corrosion, but today you can count on the many benefits of polyurea-polyaspartic. This type of floor coating is used in various facilities, and more industries are embracing its uses. Through offering protection to the daily challenges of chemicals, spills wheeled traffic, and wear and tear, polyurea-polyaspartic is a suitable option for safeguarding gym concrete floor plates.

Read on below to get firm knowledge of why polyurea-polyaspartic floor coating remains the best option for public and home workout gyms.

4 Features to Seek in Commercial Gym Flooring - SealTek Surface Coatings -  O'Fallon | NearSay

Safety and Protection

The type of floor highly determines the value of workout space. Nobody would want to go for workouts and come out with a leg or hand injury. Polyurea-polyaspartic floor coating ideally suits a good gym as it is highly resistant to harsh abrasions and higher temperatures. Additionally, the coating is inexpensive to maintain as you do not need to spend your time on regular waxing or surface treatment. Once installed, you can be sure to get free from wear and tear floor coating to help prevent the risks of falling while exercising. 

Quick Installation

You don’t have to waste your time waiting for long hours or days before having your floor coat fully installed. The polyurea-polyaspartic coating dries up swiftly once applied on the floor. A day is sufficient to install and get the polyurea-polyaspartic floor coating ready for use in most cases. This enables gyms to continue with their activities. Additionally, the coating has a low odor, and thus it is not likely to affect you during your daily routine. 

Customizable

The workout outlook can be a motivation to stick to your daily gym activities. Even the small things like decorations of the exercise room can add to a person’s experience in a gymnasium. Surprisingly, polyurea-polyaspartic floor coating can be utilized to establish a decorative finishing that matches the flooring needs and designs. Therefore, you can easily incorporate various polyurea-polyaspartic floor coating designs to attract or motivate clients at a gym or even at your home.

The Bottom Line

Polyureapolyaspartic floor coating can offer you the best experiences, especially when installed properly. Make sure to find a good company if you cannot accomplish the job yourself. A company like ArmorThane has an experienced team that can produce quality work to meet your needs. 

You only need to call and schedule a meeting with ArmorThane and get a free consultation for floor coating designs and other discoveries.

What You Should Know About Polyurea And Polyspartic Coatings

Taking care of your garage flooring is important because you must consider the beating your garage floor receives every day. Polyurea and polyspartic coatings have become extremely popular in the past few years for garage floor coatings. These are different from the epoxy’s that contractors have been using.

Polyurea and polyspartic garage floor coatings are fast becoming the preferred alternative to epoxy. Expert contractors and builders alike agree that the biggest benefit of polyurea and polyspartic coatings is their fast curing time, earning them the title of the “holy grail” of garage floor coatings. They are considered to be the best of everything that floor coating can do.

What are Polyurea and Polyspartic Garage Floor Coatings?

Polyurea is a subgroup of polyurethane. It is created when isocyanates combine with water to create a urea linkage. Similar to epoxy, polyurea has a 12-part component. It mixes with resin as a catalyst, giving it its strong curing reaction, making the material hard and strong. It contains little to no VOCs, with an elongation rate of more than 300%, making polyurea much more flexible than epoxy.

It is used in projects like liquid containment lining, interior pipe coating, and spray-on bed linings. It is also used in industrial applications, such as fillers for joints and tunnel coating.

Distinctively, its fast cure rate is less than 5 seconds, and the coating completely hardens in less than 5 minutes. Because of this, polyurea needs specialized equipment during application.

On the other hand, poly aspartic is a type of polyurea. It is an aliphatic polyisocyanate with polyprotic ester, which is an aliphatic diamine. It effectively neutralizes the challenges that are usually brought about by the fast cure rate of polyurea. It is used in coating applications traditionally. It has a lower pot life of 5 to 20 minutes.

In general, all polyspartics are polyurea, but not all polyureas are polyspartic.

Why You Will Benefit from Using Polyurea and Polyspartic Coatings

Polyurea and polyspartic garage floor coatings have a lot of benefits. We have listed some of the most prominent in this article however, there are many more:

Time and Temperature

Time and temperature are the two most important benefits of polyurea coating and polyspartic coatings. These are the reasons why more and more homeowners are opting to use them. Application is possible even in temperatures reaching as low as 30°F to as high as 140°F, depending on its formulation. The good thing about this is that you don’t need to wait until the winter or summer months are over to apply garage floor coatings since polyurea and polyspartic can be applied even under extreme temperatures.

The application can be made in two coatings: first, the primer and color coat, and the clear coat.

Its fast curing time permits installation to be done in just one day, so you don’t have to worry about not being able to use your garage for more than a day. Installation takes only about 6 to 7 hours, and then you can already use the garage.

No fading

With 100% UV stability, the coating will neither fade nor change color even if subjected to extreme heat and sunlight.

Crystal clear finish

Expect a crystal clear finish when you use polyurea and polyspartic floor coatings. It won’t blush from the moisture from inside the concrete.

  • Like polyurethane, they have a high abrasion and scratch-resistance properties.
  • High tolerance to heat

You can park your car inside the garage despite having hot tires, yet expect no damages at all.

  • The specialized applicator can control high film build-up
  • Its high-gloss finish makes the floor look elegant and expensive—something that you do not normally expect from garage flooring.
  • The coating has high solids content with little to no VOCs.
  • High stain- and chemical resistance

Maintenance is not much of a problem when you use polyurea coating and polyspartic garage floor coatings.

  • Good wetting characteristics

They penetrate the concrete better, so you are assured of a stronger bond that can withstand constant wear and tear.

  • Bubbles formation due to out-grassing is minimized because of the fast curing rate.
  • Highly flexible

This makes for higher impact resistance, making your garage floor less susceptible to damage.

Watch A Simple Demo Of Polyurea Floor Coating Application

Factors to Consider Before Installation

It is understandable if you are not yet sold on the idea of using polyurea and polyspartic garage floor coating instead of the more popular epoxy. So, to further help you know more about them, here is a list of important factors to consider:

  • You will be paying for more since the installation costs about $3 per square meter, on average. The materials are twice as expensive as epoxy.
  • You may need to get a professional to perform the installation, which will add greatly to the cost. You may make this a DIY project, but at least two people are needed.
  • The average pot life of polyurea and polyspartic floor coatings is about 20 to 30 minutes on average for a professional installer. It would be more difficult for someone who is not experienced in handling the materials. You might end up wasting your time and money if the installation doesn’t turn out well.
  • There are DIY kits that you can purchase, but they don’t ensure that the final output has the same quality as a professional installation.
  • Humidity at the installation time may cause more rapid curing, so you have to make sure that you monitor the materials. This is one of the reasons why it is not recommended as a DIY project.
  • The coating tends to be slippery when wet.
  • Full paint chips need to be applied on the topcoat aggregate to add texture and make the flooring slip-resistant.

While polyurea and polyspartic are exemplary for use because of theIr numerous benefits, it is important to remember that installation and application have to be handled by a professional to ensure that the process is handled well. We recommend contacting a company such as ArmorThane. We use them as an example because they have been a staple in the industry for over three decades and always rate amongst the very best.